has been upgraded to gnome3.0.1.

I found out after I logged in, No icons  and I cannot do a right

click on my desktop. I open my console and tracked my files on my desktop and

its not deleted.

Solution:

1. Install gnome-tweak-tool

$ pacman -S gnome-tweak-tool

2. Install gnome-shell

$ pacman -S gnome-shell

note: gnome-tweak-tool will not work without gnome-shell

3. Launch gnome-tweak-tool using console. Make sure that the File

Manager Have file manager handle the desktop) is ON

$ gnome-tweak-tool

4. Uninstall gnome-shell $ pacman -Rnd gnome-shell

5. Reboot

6. To right click the panel, press alt+right click

1. open terminal then type:

sudo apt-get install wvdial #in ubuntu

yum install wvdial #in fedora, centos & redhat

sudo pacman -S wvdial #kahelos & arch linux

Note: If you check the /etc directory and you found out that there is no wvdial.conf, you can create by typing touch wvdial.conf in console/terminal.

2. Edit wvdial.conf
Note: you can use vim, vi, nano & gedit editor.

3. Copy the configuration below

4. run wvdial as root

[10:46 PM] renan etc $ sudo wvdial

–> WvDial: Internet dialer version 1.61

–> Cannot get information for serial port.

–> Initializing modem.

–> Sending: ATZ

OK

–> Sending: ATZ

ATZ

OK

–> Sending: ATE0 V1 &D2 &C1 S0=0 +IFC=2,2

ATE0 V1 &D2 &C1 S0=0 +IFC=2,2

OK

–> Sending: AT+CGDCONT=,”IP”,”FBBAND”

OK

–> Modem initialized.

–> Sending: ATDT*99#

–> Waiting for carrier.

CONNECT

–> Carrier detected.  Waiting for prompt.

–> Don’t know what to do!  Starting pppd and hoping for the best.

–> Starting pppd at Sun May 30 10:46:37 2010

–> Pid of pppd: 3220

–> Using interface ppp0

–> pppd: (�[16][08](�[16][08]@�[16][08][10]�[16][08]

–> pppd: (�[16][08](�[16][08]@�[16][08][10]�[16][08]

–> pppd: (�[16][08](�[16][08]@�[16][08][10]�[16][08]

–> pppd: (�[16][08](�[16][08]@�[16][08][10]�[16][08]

–> pppd: (�[16][08](�[16][08]@�[16][08][10]�[16][08]

–> pppd: (�[16][08](�[16][08]@�[16][08][10]�[16][08]

–> local  IP address 10.150.122.98

–> pppd: (�[16][08](�[16][08]@�[16][08][10]�[16][08]

–> remote IP address 10.64.64.64

–> pppd: (�[16][08](�[16][08]@�[16][08][10]�[16][08]

–> primary   DNS address 202.138.128.50

–> pppd: (�[16][08](�[16][08]@�[16][08][10]�[16][08]

–> secondary DNS address 202.138.128.54

–> pppd: (�[16][08](�[16][08]@�[16][08][10]�[16][08]

And The Problem is: Xorg

Solution: Pls follow the steps below

Auto Configuration

1. # Xorg -configure

Note: Run Xorg -configue as root. The use of this command will cause the Xorg server to loads all the video driver modules, probes for available hardware, and write an initial xorg.conf file based on what was detected. The command automatically generates /root/xorg.conf.new.

2. Rename the xorg.conf.new. Make it xorg.conf

3. Copy xorg.conf inside /etc/X11/

4. Reboot

Thats it!!!

To Join the group kindly visit http://www.facebook.com/group.php?gid=110052092371130

Do the following commands

# useradd -m nagios
# echo ‘****’ |passwd –stdin nagios
# groupadd nagcmd
# usermod -a -G nagcmd nagios
# usermod -a -G nagcmd apache
# cd /usr/local/src

#wget http://downloads.sourceforge.net/project/nagios/nagios-3.x/nagios-3.2.0/nagios-3.2.0.tar.gz?use_mirror=ufpr

# tar -zxvf nagios-3.2.0.tar.gz

Optional # rm -f nagios-3.2.0.tar.gz

# cd nagios-3.2.0/

# ./configure –with-command-group=nagcmd

# make all

# make install

# make install-init

# make install-config

# make install-commandmode

# make install-webconf

# htpasswd /usr/local/nagios/etc/htpasswd.users <username>

# service httpd restart

# wget http://downloads.sourceforge.net/project/nagiosplug/nagiosplug/1.4.14/nagios-plugins-1.4.14.tar.gz

use_mirror=ufpr

# tar -zxvf nagios-plugins-1.4.14.tar.gz

Optional # rm -f nagios-plugins-1.4.14.tar.gz

# cd /usr/local/src/nagios-plugins-1.4.14

# ./configure –with-nagios-user=nagios –with-nagios-group=nagios

# make

# make install

# chkconfig –add nagios

# chkconfig nagios on

# service nagios start

Problem

1.It appears as though you do not have permission to view the configuration information you requested…

If you believe this is an error, check the HTTP server authentication requirements for accessing

this CGI and check the authorization options in your CGI configuration file.

Solution: You need to set “authorized_for_configuration_information” in cgi.cfg (nano /usr/local/nagios/etc/cgi.cfg

What is Vodafone 3G devices Internet connection assistant?

Steps on how to install and configure the vodafone mobile connect

1. Download the package and install the dependencies https://forge.betavine.net/frs/download.php/119/vodafone-mobile-connect-card-driver-for-linux_2.0.beta1_i386.deb

2. After downloading the package. Open it with the GDebi Package Installer and click the install button on the right side.

Note: Above is the graphical interface on how to install vodafone mobile connect

3. After the installation you can now configure your huawei profile. Go to application>internet>vodafone mobile connect card driver for linux. Then open the application.

Note: Above is the graphical interface loading the vodafone mobile connect

4. After loading the vodafone mobile connect, you can now create a new profile for your huawei.

Note: Above is the graphical interface on how to create a new profile

5. After creating new profile click OK you can now surf the internet and ENJOY!!!

How to Use Vodafone Mobile Connect

Note: Above is the Graphical interface if you want to use some features of vodafone mobile connect

The connect Button – if you want to connect to the internet you can simply click the connect button

The Mail – if you want vodafone directly connect to you email client you can simply click the mail button.

The SMS – if you want to use vodafone to send some message to your friend you can simply click the SMS button.

The Internet – if you want to load your web browser automatically you can simply click the Internet button.

The Usage – if you want to check the usage of your vodafone. How many data are being transferred? Remember that this information is only orientative.

The Support – you can easily find answer to the most common questions in the help menu or simply call your administrator. For more information kindy visit http://empresas.vodafone.es

Steps on how to solve Dansguardian error

1. See what are the errors in your logs (/var/log/dansguardian-av/access.log)

2. On my log, it says that no exceptionextensionlist and exceptionmimetypelist (no such file or directory)

3. recreate a exceptionextensionlist and exceptionmimetypelist file inside /etc/dansguardian-av/list (this is the location where to place the exceptionextensionlist and exceptionmimetypelist

4. service dansguardian-av start

Note: The content filtering is now functioning in webconfig after restarting dansguardian-av

Is there a need to lay down one’s Philosophy in this age of Technology?
Is it essential to discuss our own when all we want is just to have our Philosophy reflected in what we do, how we do it and why we did it?

The question then remains, do we have a Philosophy that we can call our own?

This is what we believe: KahelOS is a technological work and a philosophical manifestation.

• Kahel is against the injudicious measure of software monopoly. Kahel recognizes that a software that is available for ALL is not a profit loss but a credibility gained.

• Kahel is against the misguided rationalization of software piracy. The choice between “free and open source” vs “illegal copies”  is not about cost. It is about performance, values and utility. You are what you choose to download or use.

• Kahel is against the misplaced labels in the values of information technology. Kahel believes that there is a Linux OS right for you. In the same way that life and living is all about choices and the choices that you make reflects you.Your choice is dependent on your palate and your need. If Kahel fits your taste, style and requirement, then Kahel is the Linux OS for you.

• Kahel is against the complacent and apathetic effort to make an informed decision. KahelOS recognizes and gives high regard to competence, innovation and sharing what one has learned and found out along the way for the greater good. Kahel may not be the “perfect” fit for you, but you can make it just as perfect as you want it to be…

• KahelOS likes simplicity, lightness and readiness of use for end-users. But it doesn’t like spoon feeding.

• KahelOS likes to spark critical thinking and yield towards the needed change.

Because, KahelOS is Open For Change.One other thing we believe is: We can never escape from change but rather evolve with the changing times.

May Pilosopiya ang KahelOS (Filipino Version)

Bakit nga ba kailangang isulat ang Pilosopiya, lalo na’t ito’y naaayon para sa makabagong Teknolohiya?
Lahat ba talaga ng bagay, tao, institusyon o proyekto ay mayroon nito?

Kung meron man para sa KahelOS, mahalagang ipakilala ito at ipaunawa ito, hindi magpaunawa (oo, magkaiba iyon)

Sa Pilosopiya, maaaring isalamin kung saan at pano hinalaw o hinango ang isang bagay, opinyon o layon.
Sa maikling pananalita, ito yong naglalagom bakit nagawa o naisip panimulan ang proyektong KahelOS
Sa malaong baga, ito higit sa lahat ang magiging sandigan ng pananahan o pananatili ng KahelOS.

Kung kaya naman ang Kahel ay isang layong may angking Pilosopiya:

• Tumutuligsa ang KahelOS sa monopolyo, sa pamimirata ng software at sa kaakibat na pananaw upang maging tama ang ugaling mamirata na lamang.

• Labag ito sa kamangmangan at pagpapanatili ng isa o ng ilan na tayo’y maging mangmang.

• Walang puwang ang pagiging alipin ng ilan sa katamaran at pagwawalang bahala upang magbago at umunlad.

• Kinikilala naman ng KahelOS na di kayang tugunan ng iisang OS ang pangangailangan ng iba’t ibang tao o institusyon.

• Mariing nagbibigay pugay ito sa pagpapakadalubhasa at paglalayag at pagsulong ng inobasyon.
• Ang KahelOS ay para sa progresibo at nagsusulong ng progreso para sa sarili at bayan.

Gaya ng kasabihang, Kung hindi ukol, Di bubukol, mayroong  Linux OS na bagay para sa iyo; ayon sa iyong panlasa, ayon sa iyong pangangailangan.   At kung kayang tugunan ng Kahel ang iyong panlasa’t pangangailangan bukod sa katangian nitong angkin, ang Kahel OS ay para sa iyo.

Ang Pilosopiya ng Kahel ay maging “Bukas sa Pagbabago”
Ito ay sa kadahilanang, walang nagmimintis sa pagbabago

dri2proto
libgl
mesa
xf86-video-ati
ati-dri

Login as superuser

pacman -Rd dri2proto
pacman -Rd libgl
pacman -Rd mesa
pacman -Rd xf86-video-ati
pacman -Rd ati-dri

2. Compile and install the latest GIT-version of ATI drivers and 3D graphics systems using ‘yaourt’.

dri2proto-git
libgl-git
mesa-gi
xf86-video-ati-git
ati-dri-git

Login as superuser

yaourt dri2proto-git
yaourt libgl-git
yaourt mesa-gi
yaourt xf86-video-ati-git
yaourtati-dri-git

3. Edit the /etc/mkinitcpio.conf and add this ati_agp radeon

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES=”piix ide_disk reiserfs”
MODULES=”ati_agp radeon crc32c libcrc32c btrfs ext4 udf nilfs2 acpi-cpufreq cpufreq_stats cpufreq_powersave cpufreq_userspace cpufreq_ondemand cpufreq_conservative freq_table”

4. Edit the /etc/rc.conf and add ati_agp radeon

# ———————————————————————–
# HARDWARE
# ———————————————————————–
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of ‘MOD_BLACKLIST’ is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD=”yes”
#MOD_BLACKLIST=() #deprecated
MODULES=(fuse ati_agp radeon usblp)

5. Generate a new kernel
sudo mkinitpcio -p kernel26

6. Reboot